Checking the signal strength in Novatel Mobilink Wireless Connection Manager 1.x.
SUBJECT:
Checking the signal strength in Novatel Mobilink Wireless Connection Manager 1.x.
FACT:
Novatel Mobilink Wireless Connection Manager 1.x.

Informational Only | Limited Support: This solution is intended for informational purposes only. AT&T provides network, billing, and provisioning support for the wireless voice and data networks. Additional support beyond this solution must be directed to Novatel Wireless at http://www.novatelwireless.com/ or your internal IT department.


FIX:
  1. When launching software, it will have the card scan for available UMTS 1900 Mhz networks.

  2. If an AT&T UMTS signal is found, the strength of the signal is displayed on the right side of the main screen of Mobilink.


NOTE:

Signal Strength indication:

  • 4 bars = greater or equal to -60 dbm
  • 3 bars = between -75 and -60 dbm
  • 2 bars = between -90 and -75 dbm
  • 1 bar = between -105 and -90 dbm
  • no bar = below -105 dbm



If you are viewing information on devices or services, please note: content reflects instructions for devices and services purchased from AT&T.
Some differences may exist for devices not purchased from AT&T.


Top