Removing or inserting the SIM card on Sierra Wireless Aircard
SUBJECT:
Removing or inserting the SIM card on Sierra Wireless Aircard
Removing or inserting the SIM card on Sierra Wireless Aircard 710
Removing or inserting the SIM card on Sierra Wireless Aircard 750
Removing or inserting the SIM card on Sierra Wireless Aircard 775
Removing or inserting the SIM card on Sierra Wireless Aircard 860
FACT:
Sierra Wireless Aircard 710
Sierra Wireless Aircard 750
Sierra Wireless Aircard 775
Sierra Wireless Aircard 860
FIX:

Removing the SIM Card

  1. To remove the SIM card, you will need a slim object, such as the tip of a pen or a straightened paper clip, to push into the eject hole.

  2. Position the pen or paperclip above the eject hole, which is on the top surface of the AirCard housing, just to the right of the SIM card slot.
  3. Press down firmly (but without excessive force) on the eject hole. The SIM card will pop out of the slot.

  4. Gently pull the SIM card from the slot until it slides free.

Inserting the SIM Card

  1. Turn the PC Card right side up, and locate the SIM card slot.

  2. Turn the SIM card right side up so that the flat side of the SIM card is facing the PC card and the numbers/beveled edge are closest to you.
    NOTE: Gold contact is facing down. SIM card should not be visible when inserted properly.

  3. To Insert the SIM card gently insert into the slot until it clicks in.




If you are viewing information on devices or services, please note: content reflects instructions for devices and services purchased from AT&T.
Some differences may exist for devices not purchased from AT&T.


Top